Straight answers
You get photos of what we find and a clear price before we start. No surprise add-ons.
Connecticut's road brine goes to work on your undercarriage every winter. We come to you, in your driveway, lot or yard. We knock down rust, prep it and seal it.
Three quick taps and we'll point you to the right one.
Tap any coating for the technical details.
Our most affordable option. Plan on reapplying every year, or get your yearly coat with a protection plan.
Technical detailsGreat protection that creeps into seams. Plan on a fresh coat every 1–2 years, or get your yearly coat with a protection plan.
Technical detailsLifetime warranty on commuter vehicles. Keep it active with the yearly Platinum plan ($200/yr).
Technical detailsOur most durable option. Cures rock-hard over properly prepped rust and seals it off for good. A 2–3 day, prep-heavy process.
Technical detailsReal jobs we've done. Tap any photo to see it full size.
Customer reviews coming soon.
For the truck you plan to keep forever, or the vintage car you want looking showroom-clean underneath. POR-15 cures into a hard, non-porous shell that seals rust off from air and moisture. It's the full manufacturer process with hand and wire-wheel prep, and nothing skipped.
Vintage and classic cars are the same $1,500. Plus tax. Removal and welding are billed hourly and quoted after we inspect the vehicle. Some frames may not be repairable. A deposit is required to book.
Coating goes on only in dry conditions (humidity under 75%), then cures before the vehicle goes back on the road.
Per vehicle, per year. Priced by the coating you have. Large and commercial vehicles quoted by size.
Keeping your Cosmoline warranty? The Cosmoline lifetime warranty stays active as long as you keep the yearly plan. The yearly inspection and touch-up is what keeps the protection lasting.
Five quick steps. Your price updates as you go, and we write the request for you.
Ready to book? Pick an open time below. Your quote is attached to the booking automatically, and you'll get a confirmation email.
Calendar not loading? Open it in a new pageText it to 860-771-0585 with photos of any rust or damage attached. We reply with a date, usually same day.
Since 2009, CTDOT has treated highways with salt mixed with liquid magnesium chloride. It works at colder temperatures than plain salt, and it pulls moisture from the air, so it stays wet and keeps working on bare metal long after the storm. AAA estimates road de-icers cause about $3 billion in rust damage to U.S. vehicles every year. Frames, brake lines, fuel tanks and exhaust take the hit first. Undercoating puts a barrier between that brine and your metal.
Late spring, summer or fall. Both soft and hard undercoatings cure best in warmer weather, so the warmer months give you the longest-lasting protection. Get it done before the first salt hits the road and the coating is ready for winter. Before every job, run the vehicle through a car wash with underbody spray the day before so the salt gets rinsed off first.
Most undercoating jobs take 2 to 4 hours at your location. POR-15 frame restoration is a 2 to 3 day job because about 75% of the work is preparation.
Absolutely. Your vehicle is ready to drive when we pack up, so you can head to work or wherever the day takes you.
No. You won't notice any smell inside or outside your vehicle.
Yes. Give the coating a day to settle in, then a normal car wash won't hurt it.
Older vehicle, or only keeping it a couple more years? Fluid Film. Want it to last longer between coats? WoolWax. Want our most popular, longest-lasting wax for a daily driver or work truck? Cosmoline. Keeping it forever or fixing a rusty frame? POR-15. Still not sure? Try the coating finder or pick “Not sure, recommend one” in the quote and we'll help you choose.
Light surface rust removal is included with every job. Heavier flaky rust is ground down and treated at $110/hr, and rotted sections can be cut out and welded. We'll send you photos of what we find before doing any extra work. Some frames are too far gone to save, and we'll tell you straight if yours is one of them.
Yes, every job is mobile. There's no travel fee within 20 miles of Andover, and it's waived for 3 or more vehicles at one stop.
Mobile undercoating on your schedule, so your trucks don't sit at a shop. No travel fee for 3 or more vehicles, volume discounts, a yearly protection plan for every truck, one invoice for the whole fleet, and US DOT annual inspections for trucks over 10,000 lbs. Dealers: ask about wholesale pricing on lot inventory.
Heckler Enterprises LLC is a small, owner-operated mobile business based out of Andover, CT, serving Central Connecticut & beyond. It's built on the standards of the big fleets, with the attention you only get when the owner is the one under your vehicle.
Before starting Heckler Enterprises in 2021, Michael spent 12 years in the automotive and diesel industry, keeping trucks and cars on the road for a couple of well-known vehicle fleets. Fleet work emphasizes one requirement: fix it right the first time. Vehicles have to pass inspection, stay reliable through New England winters and get back in service fast, because every day off the road costs someone money.
That's where he learned to diagnose problems quickly and keep heavy-use trucks from rusting out from under their owners. Then he struck out on his own to bring that same fleet-level work to local drivers, contractors and businesses.
Today Heckler Undercoating brings that work to you: undercoating, rust repair and POR-15 frame restoration, done on site with our mobile rig.
You get photos of what we find and a clear price before we start. No surprise add-ons.
Every vehicle gets the same prep and care a commercial fleet would demand, whether it's a work truck or your daily driver.
Salt, brine and freeze-thaw cycles are what we protect against every day. We know what they do to a frame.
Your driveway, lot or yard. No dropping it off, no ride to arrange, no day without your vehicle.
Call or text Michael at 860-771-0585, or build your quote in a couple of minutes. Appointments Monday to Saturday, 9 AM to 9 PM, and Sundays on request.